Bronze 5 :
The slender Bronze Five delivers powerful, responsive bass lines that belie its stealthy appearance and surpass those of many much larger towers. Its 5 1/2” C-CAM® bass driver and 5 1/2” C-CAM® bass/mid driver are arranged in a two and half way system configuration, operating in separate acoustic chambers with front and rear firing HiVe ports to provide differential tuning for higher efficiency and greater low frequency extension. The Bronze Five’s low-distortion architecture expertly combines clean, expressive mid and high frequencies with punchy room-filling bass lines delivering a naturally rhythmic and addictive blend of large-scale dynamics and detail from a surprisingly unobtrusive tower.
Technology
-
New C-CAM® gold dome tweeter
-
Twin 5 1/2" C-CAM® bass and mid-range drivers
-
Single bolt-through driver systems for increased overall bracing, rigidity and driver/baffle de-coupling
-
HiVe® port technology
-
High quality crossovers with premium grade Polypropylene film capacitors used throughout
-
Rigid 18mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration
-
Floor-level terminal panel for easy termination and neat cable access. Bi-wire/ Bi-amp terminal configuration
-
Premium quality vinyl veneer finishes
Specification
System Format |
2 1/2 Way |
Maximum SPL (dBA @1M – each) |
113.8dBA (pair) |
Crossover Frequency |
LF: -6dB @ 600Hz
MF/HF: 2.8kHz |
Frequency Response |
37Hz - 30kHz |
Power Handling R.M.S. |
120W |
Drive Unit Complement |
1 x 5 1/2" C-CAM® bass
1 x 5 1/2" C-CAM® bass mid-range driver
1 x 25 mm gold dome C-CAM® tweeter |
Sensitivity (1W@1M) |
90dB |
Recommended Amplifier Requirements |
30-120W |
Cabinet Dimensions: (H x W x D) |
850 x 165 x 248 mm
(33 7/16 x 6 1/2 x 9 3/4 inches) |
Nominal Impedance |
8Ω |
Cabinet Design |
Dual chamber bass reflex – Ported front and rear HiVe®II Port technology |
Complete Dimensions inc grille, terminals, plinths and spikes: (H x W x D) |
898 x 215 x 282 mm
(35 5/8 x 8 7/16 x 11 1/8 inches) |
Weight (Individual) |
11kg (24lbs 6oz) |
Bronze center
By sharing the New Bronze acoustic and aesthetic design ethos, the compact Bronze Centre is the natural partner for Bronze left/right speakers in a home theatre LCR array. It features twin 5 1/2” C-CAM® bass/mid-range drivers straddling a Bronze C-CAM tweeter for pin-point synergy with its satellite partners producing seamless front soundstage action and articulate dialogue.
Technology :
-
Dual 5 1/2” bass/midrange drivers with concave ‘dished’ C-CAM® cone profile
-
Acoustically matched to Bronze speaker systems for excellent imaging and consistency of timbre in surround applications
-
Single bolt-through driver systems, for increased overall bracing, rigidity and driver/baffle de-coupling
-
High quality crossovers with premium grade Polypropylene film capacitors used throughout
-
Rigid 18mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration
-
Invisible magnetic grille fixing
-
Premium quality vinyl veneer finishes
Specs :
System Format |
2 Way |
Frequency Response |
60Hz - 30kHz |
Nominal Impedance |
8Ω |
Maximum SPL (dBA @1M – each) |
113dBA |
Power Handling R.M.S. |
120W |
Recommended Amplifier Requirements |
20-120W |
Cabinet Design |
Sealed Cabinet |
Drive Unit Complement |
2 x 5 1/2" C-CAM® bass mid-range driver.
1 x 25 mm gold dome C-CAM® tweeter |
Crossover Frequency |
3.0kHz |
Cabinet Dimensions: (H x W x D) |
165 x 460 x 165 mm
6 1/2 x 18 1/8 x 6 1/2 inches |
Complete Dimensions inc grilles & terminals: (H x W x D) |
165 x 460 x 193 mm
6 1/2 x 18 1/8 x 7 5/8 inches |
Weight (Individual) |
5.6kg (12lbs 6oz) |
Bronze FX
Developing the perfect mix of reverberant or direct surround sound in a Bronze home cinema system, the wall-hugging New Bronze FX surround speaker will combine seamlessly with front channels to establish the immersive audio experience essential to successful home theatre design. Matched acoustically and aesthetically with its LCR counterparts, its angled-baffle cabinet can be flush-mounted on side or rear walls, and its dispersion characteristics changed at the flick of a switch to accommodate the precise requirements for di-pole (diffuse) or bi-pole (direct) operation. Flanking a single 5 1/2” C-CAM bass/mid driver, dual C-CAM gold dome tweeters are mounted on angled side-panels, helping to create a wider, more enveloping and convincing surround sound-field.
Technology :
-
Acoustically matched with all other Bronze speakers for excellent imaging and timbre consistency in surround applications
-
New C-CAM® gold dome tweeter design
-
5 1/2” bass/mid-range driver with concave ‘dished’ C-CAM® cone profile
-
Optimised for di-pole or bi-pole operation by the simple flick of a switch located on the rear terminal panel
-
Single bolt-through driver system, for increased overall bracing and rigidity
-
High quality crossovers with premium grade Polypropylene film capacitors used throughout
-
Premium quality vinyl veneer finishes
Specs :
System Format |
2 Way |
Frequency Response |
65Hz - 30kHz |
Sensitivity (1W@1M) |
88dB |
Nominal Impedance |
8Ω |
Maximum SPL (dBA @1M – each) |
110dBA (pair) |
Power Handling R.M.S. |
80W |
Recommended Amplifier Requirements |
20-80W |
Cabinet Design |
Sealed Cabinet |
Drive Unit Complement |
1 x 5 1/2" C-CAM® bass mid-range driver.
2 x 25 mm gold dome C-CAM® tweeter |
Crossover Frequency |
2.8kHz |
Cabinet Dimensions: (H x W x D) |
274 x 276 x 105 mm
(10 13/16 x 10 7/8 x 4 1/8 inches) |
Complete Dimensions inc grilles & bracket: (H x W x D) |
274 x 281 x 118 mm
(10 13/16 x 11 1/6 x 4 5/8 inches) |
Weight (Individual) |
3.2kg (7lbs) |
Bronze W10
All the audiophile-like transparency of New Bronze’s low-distortion design regimen concentrated in the bass domain. This is New Bronze bass, deeply provisioned, authentically proportioned and dynamically fleet of foot, re-tooled from the ground up to punctuate the sound of every New Bronze system with stunningly natural bass transients, timed to perfection. The sophisticated W10 subwoofer is a New Bronze original, featuring an exclusive trinity of uprated amplifier topology, powerful DSP processing and new long-throw driver design. Advanced switch-mode power conversion techniques, custom DSP tuning and a massive power reservoir combine to generate enormous dynamic headroom from the Class D power-pack, allowing the driver to drop low and punch hard without distortion for a truly sensational deep bass experience. A down-firing 10” ABR (Auxiliary Bass Radiator) ensures that with the same compact footprint as its predecessor, the W10 delivers an incredible 6dB greater SPL at 40Hz. Choose how you enjoy the W10’s prodigious bass energy with pre-set EQ settings for music, movie or impact.
Technology :
-
Ultra long throw 10” driver featuring concave ‘dished’ C-CAM cone
-
10” flat panel ABR (auxiliary bass driver) mounted on the bottom to augment low frequency extension and power handling
-
Powerful Class-D Amplifier delivering over 200W with low distortion
-
Switch Mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
-
DSP processing with all control features and crossover performed in the digital domain
-
Three pre-set EQ mode settings (Music, Movie, Impact)
-
12 volt trigger - provides switching control from AV amp, processor or home automation control system
-
18mm thick MDF construction
-
Heavy cabinet bracing applied to provide stiff, low resonance cabinet
-
Premium quality vinyl veneer finishes
Specs :
Low Frequency Limit |
30Hz |
Upper Frequency Limit |
40-120Hz (Variable Low Pass filter) |
Low Pass Filter Alignment |
12dB/ Octave variable + 12dB/ Octave Fixed @ 150Hz |
Amplifier Output |
220W R.M.S |
Amplifier Classification |
Class D with Switch mode PSU |
Drive Unit Complement |
1 x 10" C-CAM® Long throw subwoofer driver + 1 x 10” flat panel ABR |
External Dimensions: (H x W x D) |
320 x 320 x 330 mm
12 5/8 x 12 5/8 x 13 inches
(364 x 320 x 364 mm
14 5/16 x 12 5/8 x 14 5/16 inches inc grille amp & feet) |
Input Impedance |
20kΩ |
Standby power consumption |
0.5W (ErP approved) |
Mains Input Voltage |
110-120Vac - 50-60Hz
220-240Vac - 50-60Hz
Electronic auto-select |
Weight |
12.9kg (28lb 6oz) |
|