Audio Centre
Email :
Password :
  Lupa Password?
Find us at:
               
    
 
Shopping cart  Keranjang belanja (0)
 
 
Statistik

Cables & AccessoriesTurntable Accessories › Rega TT-PSU

Rega TT-PSU

Gambar lainnya :
Rega TT-PSU

Rega TT-PSU

Harga : Rp 4.000.000,-
Jumlah : pc(s)
 

Phone : 021-62302809

SMS Order : 0816 716 248 (Andrew)

CP : Andrew


Phone : 021-62302809

SMS Order : 08 1122 8280 (Ronald)

CP : Ronald

 
Penjelasan Produk

The new TT-PSU, housed in our new style case, has a new anti-vibration circuit, output circuit protection and improved power supply regulation. Offering the convenience of electronic speed change, reduced motor noise and increased stability for all Rega 24v motor turntables.

The TT-PSU is an ideal upgrade path for the RP3 or the RP1 (RP1 when fitted with the 24v motor upgrade kit).

Product Detail

Important: The TT-PSU can only be used with the RP1, RP3, P3-24, RP6, P5 and P7 turntables. It is not compatible with any other Rega or manufacturers turntables.

The all new TT-PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply along with an improved P25 anti-vibration motor drive feeding the P9 24v AC synchronous motor. The TT-PSU uses a remote "wall wart" transformer therefore keeping the sources of hum & noise well away from sensitive parts such as the cartridge and phono leads.

The compact TT-PSU uses exactly the same high stability, crystal locked, low distortion, sine wave generator as is used in the heart of the P9 power supply. This, along with an efficient drive amplifier fed from stabilised DC power supply, generates a 24v AC balanced signal of less than 0.05% distortion, which is completely unaffected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit which is situated beneath the turntable.

The drive voltage for the motor is run along the power lead to the turntable motor which also carries the 33/45-RPM DC relay control voltage used to activate the anti-vibration circuit.

 

Technical Specification

  • The TT-PSU can be used in conjunction with the RP3, P3-24 and P5 Turntable as an optional upgrade.
  • Dimensions: Width 178mm x Depth140mm x Height 45mm.
 
Produk Lain Sekategori : Cables & AccessoriesTurntable Accessories
Clearaudio Nano Phono V2

Clearaudio Nano Phono V2
Rp 5.000.000,-

 
Clearaudio Concept Clamp

Clearaudio Concept Clamp
Rp 1.650.000,-

 
Rega Drive Belt Upgrade

Rega Drive Belt Upgrade
Rp 750.000,-

 
Rega Bias 2 cartridge (MM) Moving Magnet

Rega Bias 2 cartridge (MM) Moving Magnet
Rp 2.100.000,-

 
 
comments powered by Disqus